TP-LINK 1910010885 User Manual

 

51 

format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified 
length.  ASCII format stands for any combination of keyboard characters in the specified 
length.  

• 

WEP Key: Select which of the four keys will be used and enter the matching WEP key that 
you create. Make sure these values are identical on all wireless stations in your network. 

 

• 

Key Type: You can select the WEP key length (64-bit, or 128-bit.) for encryption. 
"Disabled" means this WEP key entry is invalid. 

 

You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 

not promoted) or 5 ASCII characters.   

128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 
not promoted) or 13 ASCII characters.   

)

If you do not set the key, the wireless security function is still disabled even if you have selected 
Shared Key as Authentication Type.

 

Be sure to click the Save button to save your settings on this page. 

Choose menu “Wireless” Æ ”Wireless MAC Filtering”, you can control the wireless access by 
configuring the Wireless MAC Filtering function, shown in Figure 4-39. 

 

Figure 4-39 

To filter wireless users by MAC Address, click Enable. The default setting is Disabled. 

¾

 

MAC Address: The wireless station's MAC address that you want to filter.   

¾

 

Status: The status of this entry either Enabled or Disabled. 

¾

 

Description: A simple description of the wireless station.   

To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will 
appear, shown in Figure 4-40: