TP-LINK 4.1.1 1910011002 User Manual

 

- 18 - 

¾

 

WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.   

z

 

PSK Password - You can enter ASCII or Hexadecimal characters.   

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the 
length should be between 8 and 63 characters. 

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, 
the length should be between 8 and 64 characters. 

Please also note the key is case sensitive, this means that upper and lower case 
keys will affect the outcome. It would also be a good idea to write down the key and 
all related wireless security settings.   

¾

 

No Change - If you chose this option, wireless security configuration will not change! 

¾

 

More Advanced Wireless Settings – Select to configure more wireless parameters. 

 

 

Figure 3-13    Quick Setup - More Advanced Wireless Settings 

¾

 

Mode - This field determines the wireless mode which the Router works on. 

¾

 

Channel Width - Select any channel width from the drop-down list. The default setting 

is automatic, which can adjust the channel width for your clients automatically. 

¾

 

Channel - This field determines which operating frequency will be used. The default 

channel is set to Auto, so the AP will choose the best channel automatically. It is not 

necessary to change the wireless channel unless you notice interference problems with 

another nearby access point. 

These settings are only for basic wireless parameters. For advanced settings, please refer to 

5. Click 

the 

Next button. You will then see the Finish page as shown in Figure 3-14.   

Click the Finish button to finish the Quick Setup.  

 

Figure 3-14    Quick Setup - Finish