Trendnet TPL406E2K User Manual
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-406E / TPL-406E2K
21
Technical Specifications
Hardware
Standards
IEEE 1901, HomePlug® AV, IEEE 802.3, IEEE 802.3x, IEEE
802.3u
Interface
• 1 x 10/100Mbps Auto-MDIX RJ-45 port
• Power prong
o
A: North America Type B (NEMA 5–15)
o
EU: Euro Type C (CEE 7/16)
o
UK : United Kingdom Type G (BS 1363)
Frequency Band
2 ~ 68 MHz
Modulation
OFDM Symbol Modulation on link synchronization,
1024/256/64/8 - QAM, QPSK, BPSK, ROBO Carrier
Protocol
TDMA, and CSMA/CA
Speed
Powerline: up to 500Mbps**
Ethernet: Up to 200Mbps (Full Duplex mode)
Utility OS Compatibility Windows 7 (32/64-bit), Vista (32/64-bit), XP(32/64-bit)
Nodes
Nodes
Up to 8 (max.)
Overlapping
Powerline Networks
Powerline Networks
Up to 4 (per electrical system)
Coverage
Up to 300m
(984ft.)
Security
128-Bit AES (Advanced Encryption Standard)
LED
Power (PWR)
Powerline (PL) with Connection Quality Indication
Powerline (PL) with Connection Quality Indication
• Best (Green)
• Better (Amber)
• Good (Red)
• No connection (Off)
• Better (Amber)
• Good (Red)
• No connection (Off)
Ethernet Connection
• Solid
• Blinking
• Off
• Off
Buttons
Sync (3 sec.)/Reset (20 sec.)
Dimension (L x W X H)
A: 70 x 50 x 43 mm (2.76 x 1.97 x 1.69 in.) per unit
EU: 70 x 50 x 63 mm (2.76 x 1.97 x 2.48 in.)
EU: 70 x 50 x 63 mm (2.76 x 1.97 x 2.48 in.)
per unit
UK: 70 x 50 x 58 mm (2.76 x 1.97 x 2.28 in.)
per unit
Weight
A: 51 g (1.8 oz) per unit
EU: 56.7 g(2.0 oz)
EU: 56.7 g(2.0 oz)
per unit
UK: 68 g (2.4 oz)
per unit
Power Source
100~240V AC, 50~60Hz
Consumption
Active mode: 2.2 Watts (max.)
Standby mode: 0.5 Watts (max.)
Standby mode: 0.5 Watts (max.)
Temperature
Operating: 0° ~ 40°C (32° ~ 104°F)
Storage: -10° ~ 55°C (14° ~ 131°F)
Storage: -10° ~ 55°C (14° ~ 131°F)
Humidity
Max. 95% (non-condensing)
Certifications
CE, FCC
* Maximum of 8 adapters (nodes) recommended for streaming video across your network.
** 500Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary
depending on environment.
*** Networked Powerline devices need to be plugged into power outlets that are on the same
*** Networked Powerline devices need to be plugged into power outlets that are on the same
electrical system.
**** GFCI outlets and AFCI circuit breakers may degrade Powerline network signals.
**** GFCI outlets and AFCI circuit breakers may degrade Powerline network signals.