Siemens SM2 monitoring system User Manual

U3585-J-Z125-8-76

131

Statements for SM2 administrators

This statement is used to define the devices for the SYSSTAT monitoring program.

USED-DEVICES = *NONE
No devices are to be monitored by the SYSSTAT monitoring program.

USED-DEVICES = *ALL
All devices are to be monitored with the exception of the communication controllers
(CTCCs, TRANSDATA 960s, 8170 Cluster Controllers, LAN adapters, HNCs and SCPs).

USED-DEVICES = list-poss(64): *DISK
All disk devices are to be monitored.

USED-DEVICES = list-poss(64): *TAPE
All tape devices are to be monitored.

USED-DEVICES = list-poss(64): <alphanum-name 2..4 with-wild>
Specifies the mnemonic device names of the devices to be monitored. A check is carried
out to establish whether these devices are defined in the configuration. An asterisk (*) is
also permitted as the last character in a wildcard specification.

SM2R1 uses the devices defined here to determine, among other things, the time
equivalent for the productive performance of the peripherals (SM2R1 report 61) and the
dilation factor (SM2R1 report 57). If possible, all devices should be monitored to capture
precise values. If these reports are required, it is recommended that you specify USED-
DEVICES=(*DISK,*TAPE).