Siemens SM2 monitoring system User Manual
180
U3585-J-Z125-8-76
SELECT-SYMMETRIX-CONTROLLER
Statements for nonprivileged users
SELECT-SYMMETRIX-CONTROLLER
Select SYMMETRIX controllers
Select SYMMETRIX controllers
Function
This statement is used to select up to 16 SYMMETRIX controllers to be displayed in the
SYMMETRIX CONTROLLER report.
SYMMETRIX CONTROLLER report.
For each selected controller, a SYMMETRIX DEVICE report is then output containing
monitored data on the individual devices supported by the controller.
monitored data on the individual devices supported by the controller.
Format
Operands
ADD-CONTROLLER-MN
=controller-mn
Defines the controllers for which SYMMETRIX DEVICE reports are
to be output using the first controller mnemonic of the emulated
3860 controllers.
In all SM2 output, both controller mnemonics of an emulated 3860
controller are always output separated by a slash.
to be output using the first controller mnemonic of the emulated
3860 controllers.
In all SM2 output, both controller mnemonics of an emulated 3860
controller are always output separated by a slash.
The following two mnemonic variants are available:
In this statement, you need only specify the first controller
mnemonic. It is possible to define up to 16 controller mnemonics.
mnemonic. It is possible to define up to 16 controller mnemonics.
Operation
Operands
SELECT-SYMMETRIX-
CONTROLLER
CONTROLLER
–
alphanum-name 2..2
–
x-text 4..4
[ADD-CONTROLLER-MN =
controller-mn
(controller-mn1[,controller-mn2]...)
]
[,REMOVE-CONTROLLER-MN =
controller-mn
(controller-mn1[,controller-mn2]...)
*ALL
]