Siemens SM2 monitoring system User Manual
54
U3585-J-Z125-8-76
VM
SM2 monitoring programs
DB-specific utilization figures (UDS and SESAM only) are only supplied if the following
conditions are met:
conditions are met:
–
BS2000 Accounting is active.
–
The UTM accounting record UTMA is switched on (using the BS2000 command
MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA).
MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA).
–
UTM Accounting is switched on (using the KDCAPPL statement, parameter ACC=ON).
–
Monitored-data acquisition is enabled in SESAM (using the statement
ACC,TP=ON,CPU).
ACC,TP=ON,CPU).
More information on this subject can be found in the manual “UTM - Generating and Admin-
istering Applications” [10].
istering Applications” [10].
VM
CPU shares of virtual machines
CPU shares of virtual machines
SM2 records the share of CPU time required by the various virtual machines of a VM2000
system. The monitoring program supplies information for all virtual machines on the VM1
monitoring system only. On all other VMs, only the values for the local VM are output. In
NATIVE mode, a message is output every time an attempt is made to start this monitoring
program.
system. The monitoring program supplies information for all virtual machines on the VM1
monitoring system only. On all other VMs, only the values for the local VM are output. In
NATIVE mode, a message is output every time an attempt is made to start this monitoring
program.