Hitachi CP-WU8450 User Manual

31

  • If the Schedule is not executed, an error message will be sent in 

accordance with the conditions set in Schedule Execution Error on Projector 

Web Control. (

 → 

) 

• If the Schedule function is set to turn off the power when the projectors are 

operating in Intellectual Stack, both the Main and Sub projectors will be turned 

off.

• If the Schedule function on the Main projector is set to turn on the power, the 

projectors will be turned on according to the LAMP MODE setting.

• When the two projectors are operating in the DUAL mode and a menu is being 

displayed on one of the projectors, the Schedule function for My Image and 

Messenger on the other projector will not be executed.

• Power Off in the table refers to turning off the power and entering the standby 

mode according to the Intellectual Stack settings or by pressing the 

STANDBY 

button on the remote control or 

STANDBY/ON button of the Main projector.

• The projectors cannot be turned on by the Schedule function on the Sub 

projector.  Set it on the Main projector if necessary.

• When the Sub projector is turned off according to the ALTERNATE MODE 

setting, the Schedule function on the Sub projector to turn off its power will be 

executed without error.  

are operating in Intellectual Stack.  If the input port to be changed according to 

the Schedule function can be used in Intellectual Stack, the Schedule will be 

executed. If not, it will not be executed. 
X *2): This Schedule can be input to Projector Web Control when the projectors 

are operating in Intellectual Stack but it will not be executed. 
X *3): This Schedule can neither be input to Projector Web Control nor be executed 

when the projectors are operating in Intellectual Stack.