Panasonic SV-P20U User Manual
8
Power Supply
ª
Using an AC Adaptor
1
Connect the DC Input Lead to the
[DC IN 4.9V] socket on the SD Mobile
Printer.
[DC IN 4.9V] socket on the SD Mobile
Printer.
2
Connect the AC main Lead to the AC
Adaptor and the AC Outlet.
Adaptor and the AC Outlet.
≥Hold down the Power Button [
] for about 2
seconds, and the printer is on.
ª
Using the Battery
1
Attach the Battery
1 to the Battery
Holder on the SD Mobile Printer
1 and
slide it forward until it locks with a
click.
click.
2
2
Connect the AC mains Lead to the AC
Adaptor and to an AC Outlet. (Refer to
the description above.)
Adaptor and to an AC Outlet. (Refer to
the description above.)
≥The [ON] Lamp flashes.
3
Leave them as above until the Power
Lamp [ON] goes off.
Lamp [ON] goes off.
≥When recharging is completed, the
[ON] Lamp
goes off.
≥Remove the AC Adaptor to use the Battery.
The SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
.
DC IN 4.9V
DC IN 4.9V
2
1
1
1
2
1
2
P20U.book 8 ページ 2003年1月7日 火曜日 午後3時10分