Panasonic SV-P20U User Manual
9
Ejecting the Battery
Slide and hold the Battery Eject Lever
2
toward
the direction shown by the arrow
1
and slide the
battery to eject
2
.
≥When recharging, turn off the power of the printer.
≥Remove the battery if the printer is left unused for a
≥Remove the battery if the printer is left unused for a
long time.
≥When the battery is fully charged, up to 24 sheets
can be printed in succession when the ambient
temperature is 77 degrees F/25 degrees C.
temperature is 77 degrees F/25 degrees C.
≥Typical charging time to fully charge the battery is
about 170 minutes (68 degrees F/20 degrees C and
humidity 60 %). Higher or lower ambient
temperature may cause a variation in the actual
charging time.
humidity 60 %). Higher or lower ambient
temperature may cause a variation in the actual
charging time.
≥When the Power Lamp flashes more quickly or
slowly (or turns off), some abnormality may have
occurred. Refer to “State of Power Lamp While
Charging” on page 46.
occurred. Refer to “State of Power Lamp While
Charging” on page 46.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
1
2
2
P20U.book 9 ページ ２００３年１月７日 火曜日 午後３時１０分