Printek MtP400 User Manual

Present Distance 
0.0000”

 

Possible Values:  0.0000”* …1.2911” 

This feature sets the distance the paper is moved forward after the black mark is sensed.  When the black mark 
is sensed, the paper will be fed forward by this amount to allow for tearing or peeling of a label.  When the next 
print job begins, the paper will be reverse fed this same amount before printing begins. 

When the Tear to Mark Distance is a negative value, this is typically set to the inverse of that value. 

 

 

 

INTERFACE MENU 

Current Host I/O

 

After entering Setup as described earlier in “Setup Basics”, press the   Advance Button until “INTERFACE 
MENU

” is displayed on the top line.   

The bottom line displays the currently selected host interface.  The Interface Menu provides access to the 
features that may be configured for the currently selected interface.   

Note that the Serial interface is standard in all MtP400 series printers.  If another, optional interface such as 
IrDA, Bluetooth, or Wi-Fi is installed, you may select between the Serial interface and the optional interface by 
pressing the   Arrow Button.  Once the desired interface is displayed, you may do one of the following: 

press the   Enter Button to review and/or change the features related to the selected interface, or 

press the   Advance Button to advance to the OPTIONS MENU 

 

Pressing the   Enter Button will advance through the following features for the selected Interface in the order 
listed below.   

Please refer to “Interfacing To A Host Computer” on page 33 for additional information. 

 

 

INTERFACE MENU 
Serial

 

Note that “Serial” must be displayed on the bottom line of the display in order to access the following 
features and for this interface to be active when Setup is exited. 

22