Printek MtP400 User Manual

Emulation 
Printek

 

Possible Values:  Printek*, O’Neil, ZPL-II, Mt3, CPCL, Hex Dump 

This feature sets the family of printer commands that may be used by a host application program to control the 
various capabilities of the printer.  The printer will only respond to commands valid for the currently selected 
emulation.  For more information, please refer to the MtP400 Series Programmer’s Manual. 

 

 

Baud Rate 
57600

 

Possible Values:  9600, 19200, 38400, 57600* 

This feature sets the baud rate for the Serial interface.  The value must match the setting used on the host 
system. 

 

 

Data Bits 
8

 

Possible Values:  7, 8* 

This feature sets the number of data bits in the serial character frame.  The value must match the setting used on 
the host system. 

 

 

Stop Bits 
1

 

Possible Values:  1*, 2 

This feature sets the number of stop bits included in the serial character frame.  The value must match the 
setting used on the host system. 

 

 

Parity 
None

 

Possible Values:  None*, Even, Odd 

This feature sets the parity checking requirements for the data bits in the serial character frame.  The value must 
match the setting used on the host system. 

 

 

23