Lexmark PRO910 User Manual
Setup 2: Printer is sharing the line with an answering machine
Connected to the same telephone wall jack
EXT
LINE
PHONE
LINE
To connect:
1
Connect the cable from the wall jack to the port of the printer.
2
Remove the protective plug from the
port of the printer, and then connect the answering machine
to the port.
Connected to different wall jacks
EXT
LINE
PHONE
LINE
To connect:
Connect the cable from the wall jack to the port of the printer.
Tips for this setup:
•
If you have only one telephone number on your line, then you need to set the printer to receive faxes
automatically (Auto Answer On).
automatically (Auto Answer On).
•
Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call.
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call.
•
If you subscribe to a distinctive ring service provided by your telephone company, then make sure that
you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if
you have set it to receive faxes automatically.
you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if
you have set it to receive faxes automatically.
Setting up the printer to fax
31