Lexmark M412 User Manual
14
Chapter 1: Setting Up Your Printer
Using a USB Cable
Your printer has one standard USB port located on the
printer system board.
printer system board.
Complete the following steps to connect your printer
using a USB cable.
using a USB cable.
For Windows 2000 users:
1
Make sure the computer and printer power are Off
(O) and the printer power cord is unplugged from
the electrical outlet.
(O) and the printer power cord is unplugged from
the electrical outlet.
2
Connect the USB cable to the port on the back of
your computer.
your computer.
3
Connect the other end of the cable to the USB port
on the back of your printer.
on the back of your printer.
4
Turn on your computer and your printer.
5
When the
Found New Hardware Wizard
screen
appears, select
Cancel
to close the wizard.
6
Insert the CD that came with your printer and
select
select
Start
.
7
From the
Start
menu, select
Run
, then click
Browse
.
8
Click on the
My Computer
shortcut in the Browse
window, double-click on the CD icon, and double-
click on the Setup icon.
click on the Setup icon.
9
Click
OK
to start the printer driver installation
program.
10
Follow the installation instructions in the printer
drivers dialog box.
drivers dialog box.
11
In the
Print to the following port
check box, select
the USB port that best describes the order you’ve
connected USB printers to your computer (for
example, the first USB printer is USB001, the sec-
ond USB002, and so on).
connected USB printers to your computer (for
example, the first USB printer is USB001, the sec-
ond USB002, and so on).
USB Port
USB
Cable
Cable