Lexmark M412 User Manual
15
Connecting Your Printer to a Computer
12
In the
Select a port for this printer
check box, select
the USB port that best describes the order
you’ve connected USB printers to your com-
puter (for example, the first USB printer is
USB001, the second USB002, and so on).
you’ve connected USB printers to your com-
puter (for example, the first USB printer is
USB001, the second USB002, and so on).
13
When you finish, exit the setup program and
remove the CD from your computer.
remove the CD from your computer.
For Windows 98 users:
1
Make sure the printer power is Off (O) and the
printer power cord is unplugged from the electri-
cal outlet.
printer power cord is unplugged from the electri-
cal outlet.
2
Align and plug the USB cable into the USB port on
the back of your printer as shown.
the back of your printer as shown.
3
Connect the other end of the USB cable to the back
of your computer.
of your computer.
4
Check the cable connections to make sure they are
completely secured.
completely secured.
5
Follow the steps under “Plugging the Printer In”
on page 20.
on page 20.
6
Follow the steps under “Turning the Printer Power
On” on page 20.
On” on page 20.
7
Complete the following steps to setup the printer
port and install the correct drivers.
port and install the correct drivers.
When you turn the printer power On (|), the
Add
New Hardware Wizard
screen appears on your com-
puter.
a
Click
Next
.
b
Click the default to search for the best driver.
Click
Click
Next
.
c
Click to clear the check boxes for
Floppy Disk
or
CD-ROM
.
USB Port
USB
Cable
Cable