Lexmark 436 User Manual
Use
To
Bin [x]
Specify a custom name for Bin [x].
Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Millimeters
Identify the units of measure.
Notes:
•
Inches is the U.S. factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3.54–48 inches
89.9–1219 mm
89.9–1219 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
maximum width allowed.
•
12 inches is the U.S. factory default setting. You can increase the
width in 0.01
width in 0.01
‑inch increments.
•
305 mm is the international factory default setting. You can increase
the width in 1
the width in 1
‑mm increments.
Portrait Height
5.5–48 inches
139.7–1219 mm
139.7–1219 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
maximum height allowed.
•
17 inches is the U.S. factory default setting. You can increase the
height in 0.01
height in 0.01
‑inch increments.
•
432 mm is the international factory default setting. You can increase
the height in 1
the height in 1
‑mm increments.
Feed Direction
Short Edge
Long Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
maximum width supported in the tray.
Bin Setup menu
Use
To
Output Bin
Standard Bin
Bin [x]*
Bin [x]*
Specify the default bin.
Note: Standard Bin is the factory default setting.
* [x] can be any number from 1 to 4 if the appropriate optional bins are installed. If multiple bins are assigned the same
name, then the name appears only once in the bin list.
name, then the name appears only once in the bin list.
Understanding the printer menus
126