KYOCERA C5025N User Manual

Press [OK] ([ENTER]). The ID input line 
appears. Enter the four-digit access code 
entered in the printer driver and press [OK] 
([ENTER]). 

To enter the ID, press 

Y or Z to move the cursor to the number to be 

changed and then enter the correct number by pressing 

U or V.

You can set the number of copies to be 
printed. To increase the copy count, press 
U; to decrease the copy count, press V.

Press [OK] ([ENTER]) to finalize the copy count. The printer prints the 
specified number of copies for the job.

You can individually delete stored jobs by performing the following 
procedure. Jobs saved using Private Print will be automatically deleted if 
you turn the power off after printing, but jobs saved using Stored Job will 
not be deleted automatically.

Follow steps 1 through 8 in the above section.

When the title of the job to be printed is 
displayed (Agenda, in this example), press 
[OK] ([ENTER]). Enter the four-digit access 
code entered in the printer driver and press 
[OK] ([ENTER]).

Press 

V repeatedly until Delete appears 

for the number of copies. 

Press [OK] ([ENTER]). The private job is deleted from the hard disk.

To print a code job, ensure that the KM-NET for Clients is installed on the 
computer. The KM-NET for Clients is provided on the Software Library 
CD-ROM.

For details, refer to the KM-NET for Clients Operation Guide.

>Agenda

 ID         0000

>Agenda

 Copies      001

>Agenda

 Copies      001

>Agenda

 Delete