KYOCERA C5025N User Manual

Printing a Proof-and-Hold job on the operator panel is similar to printing a 
quick copy job. See Printing Additional Copies using Quick Copy on page 
2-19.

In private printing, you can specify that a job is not printed until you release 
the job from the operator panel. When sending the job from the application 
software, specify a 4-digit access code in the printer driver. The job is 
released for printing by entering the access code on the operator panel 
ensuring confidentiality of the print job.

In the stored job mode, access codes are not mandatory, but can be set 
on the printer driver if printing with PIN security is required. Then, the 
access code must be entered on the operator panel to print a stored job. 
Print data will be stored in the hard disk after printing. See KX Printer 
Drivers Operation Guide for the driver settings.

Press [MENU].

Press 

U or V repeatedly until e-MPS > 

appears.

Press 

Z. 

Press 

U or V repeatedly until >Private/

Stored

 appears. The name entered in the 

printer driver (Harold, in this example) also 
appears.

Press [OK] ([ENTER]). A blinking question 
mark (?) appears before the user name.

Press 

U or V to display the desired user 

name (Arlen, in this example).

Press [OK] ([ENTER]). The user name and 
the job name (Agenda, in this example) 
entered in the printer driver appear with a 
blinking question mark (?).

Press 

U or V to display the desired job title. 

e-MPS          >

>Private/Stored

 Harold

>Private/Stored

?Harold

>Private/Stored

?Arlen

>Arlen

?Agenda