HP (Hewlett-Packard) CP4005 User Manual
5.
Insert the tray into the printer. The printer will display the tray’s media type and size. If the
configuration is not correct, press the key when the printer prompts you to configure the tray for
type and size. (For more information, see
configuration is not correct, press the key when the printer prompts you to configure the tray for
type and size. (For more information, see
.)
6.
If the configuration is correct, press to clear the message.
Loading custom-sized media into Tray 2 and optional Tray 3
To use custom media, you must change the size setting on the control panel to custom and set the unit
of measure, X dimension, and Y dimension. See
of measure, X dimension, and Y dimension. See
for more
information.
1.
Remove tray from the printer.
2.
Slide the media width guides all the way open and adjust the rear media-length guide to the length
of the paper being used.
of the paper being used.
ENWW
Configuring input trays
93