HP (Hewlett-Packard) CP4005 User Manual
Control panel settings for automatic two-sided printing
Many software applications allow you to change two-sided print settings. If your software application or
printer driver does not allow you to adjust two-sided printing settings, you can adjust these settings
through the control panel. The factory default setting is OFF.
printer driver does not allow you to adjust two-sided printing settings, you can adjust these settings
through the control panel. The factory default setting is OFF.
CAUTION
Do not use two-sided printing when printing on labels. Serious damage could result.
To enable or disable two-sided printing from the printer control panel
NOTE
Changing settings for two-sided printing through the printer control panel affects all print
jobs. Whenever possible, change settings for two-sided printing through your software application
or printer driver.
or printer driver.
NOTE
Any changes made in the printer driver will override settings made using the printer
control panel.
1.
Press
Menu
to enter the MENUS.
2.
Press to highlight CONFIGURE DEVICE.
3.
Press to select CONFIGURE DEVICE.
4.
Press to select PRINTING.
5.
Press to highlight DUPLEX.
6.
Press to select DUPLEX.
7.
Press or to select ON to enable two-sided printing or OFF to disable automatic two-sided
printing.
printing.
8.
Press to set the value.
9.
Press
Menu
.
10.
Select two-sided printing from your software application or printer driver, if possible.
ENWW
Two-sided (duplex) printing
111