HP (Hewlett-Packard) CP4005 User Manual

Sets whether the printer will attempt to
reprint pages after a jam. The default is
AUTO.

Allows you to specify how the RAM disk is
configured. When set to AUTO, the printer
determines the optimal RAM disk size
based on the amount of available memory.
The default is AUTO. This message
displays in models that do not have a hard
disk installed.

A listing of available languages
appears.

Sets the default language. The default
language is ENGLISH.

This menu allows you to configure the printer’s I/O options.

See 

.

Range: 5 - 300

Allows you to set the printer I/O timeout in
seconds.

The values may vary. Possible
values may include:

TCP/IP: Use the TCP/IP menu to configure
basic TCP/IP settings.

SECURE WEB: Specify whether the
embedded Web server accepts
communications by using only secure
HTTP (HTTPS) or by using both HTTP and
HTTPS.

RESET SECURITY: Specifies whether the
current security settings on the print server
are saved or reset to factory defaults.

LINK SPEED: Selects the network link
speed and communication mode for the
10/100T print server. To ensure proper
communication, the Jetdirect settings must
match those of the network.

The RESETS menu allows you to reset factory settings, disable and enable sleep mode, and update
the printer after new supplies are installed.

None.

Allows you to clear the page buffer, remove
all perishable personality data, reset the

ENWW

Configure device menu

51