HP (Hewlett-Packard) 3020 User Manual

Printing booklets is not supported for Macintosh.

You can print booklets on letter, legal, or A4 print media.

1. Load the print media in the media input tray.

2. In the software program, open the device properties (printer driver). For instructions, see

.

3. On the Finishing tab (the Paper Type/Quality tab for some Macintosh drivers), select

Print on Both Sides.

If the Print on Both Sides option is dimmed or unavailable, open the device properties
(printer driver). For instructions, see 

 or 

. On the Device

Settings tab or the Configure tab, select the option to allow manual duplexing, and then click
OK. Repeat steps 2 and 3.

Not all device features are available for all printer drivers or operating systems. See the device
properties (driver) online Help for information about the available features for the driver.

4. Set the number of pages per sheet to two. Select the appropriate binding option, and click

OK.

5. Print the booklet.

6. After side one has been printed, remove the remaining paper from the input tray, and set

it aside until your booklet job is complete.

ENWW

Printing booklets