HP (Hewlett-Packard) 3020 User Manual

Adjusting the copy quality

The factory-set default for copy quality is Text. This setting is the best for items that contain
mostly text.

When making a copy of a photo or graphic, you can select the Photo setting to increase the
quality of your copy, or select the Best Photo setting for the highest photo quality.

If you want to conserve toner, and the copy quality is not as important, select Draft.

To adjust the copy quality for the current job

1. On the device control panel, press

QUALITY

to see the current quality setting for the copy.

2. Use the

or the

button to scroll through the quality setting options.

3. Select a resolution setting, and then press

START

COPY

to save the selection and

immediately start the copy job, or press

ENTER

to save the selection without starting

the job.

Note

The change in the setting remains active for about two minutes after the copy job has been
completed. During this time, Settings=Custom appears on the device control panel display.

To adjust the default copy quality

1. On the device control panel, press

ENTER

2. Use the

or the

button to select Copy setup, and then press

ENTER

3. Press

ENTER

to select Default Quality.

4. Use the

or the

button to scroll through the choices.

5. Press

ENTER

to save the selection.

ENWW

Adjusting the copy quality