HP (Hewlett-Packard) 3020 User Manual

Changing the number of copies

You can choose to have the default number of copies be any number from 1 to 99.

To change the number of copies for the current job

1. On the device control panel, press

COPIES

and use the

or the

button to increase or

decrease the quantity that appears on the device control panel display.

Use the alphanumeric buttons to type the number of copies (between 1 and 99) that you
want to make for your current job.

2. Press

START

COPY

to begin copying your job.

Note

The change in the setting remains active for about two minutes after the copy job has been
completed. During this time, Settings=Custom appears on the device control panel display.

To change the default number of copies

1. On the device control panel, press

ENTER

2. Use the

or the

button to select Copy setup, and then press

ENTER

3. Use the

or the

button to select Def. # of copies, and then press

ENTER

4. Use the alphanumeric buttons to type the number of copies (between 1 and 99) that you

want as the default.

5. Press

ENTER

to save your selection.

Note

The factory-set default for the number of copies is 1.

ENWW

Changing the number of copies