HP (Hewlett-Packard) 3020 User Manual

Macintosh users: For information about starting a scan from the device control panel, see

.

Use the following instructions to scan directly from the device control panel.

For the best scan quality, place your originals onto the flatbed scanner, rather than loading
them into the automatic document feeder (ADF) input tray.

The computer that is connected to the device must be turned on.

To program the device 

SCAN

 

TO

 button, you must gain access to the device settings. Open the

HP toolbox and click the Scan to... tab. For more information, see the HP toolbox Help.

To scan to e-mail by using the 

SCAN

 

TO

 button on the device control panel, use the following

instructions.

To use this feature in Windows, an e-mail recipient must be programmed in the Scan to... tab.
See 

. For Macintosh, set up this function from the

Monitor Device tab. See the HP Director online Help.

1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF)

input tray. Adjust the media guides to hold the originals in place.

Lift the flatbed scanner lid and load the original that is to be scanned face-down on the
flatbed scanner with the top, left corner of the document at the lower-right corner of the
glass. Gently close the lid.

2. Press 

SCAN

 

TO

 on the device control panel.

3. Use the 

<

 or the 

>

 button to select an e-mail recipient.

4. Press 

START

 

SCAN

 or 

MENU

/

ENTER

. The scanned item is attached to an e-mail message,

which is then sent automatically to the e-mail recipient that you selected in step 3.

To scan to a folder by using the 

SCAN

 

TO

 button on the device control panel, use the following

instructions.

ENWW

Scanning from the device control panel (Windows)