GE BC5002 User Manual
GFK-2023C
4-1
Installing Plug-in Modules
PCI bus or ISA bus plug-in modules, such as network or field bus cards, can be installed
in the Intelligence Panel. The plug-in slots are accessed by removing the rear cover,
which is secured by cross-head screws.
in the Intelligence Panel. The plug-in slots are accessed by removing the rear cover,
which is secured by cross-head screws.
Avoiding Electrostatic Discharges
Caution
The components in Intelligence Panel PCs are susceptible to
electrostatic discharge (ESD) and can be functionally damaged by
incorrect handling. The same applies to plug-in modules. It is
therefore vital that suitable precautionary measures are taken to
avoid electrostatic discharges on contact with the components.
electrostatic discharge (ESD) and can be functionally damaged by
incorrect handling. The same applies to plug-in modules. It is
therefore vital that suitable precautionary measures are taken to
avoid electrostatic discharges on contact with the components.
1. Before touching components or modules, always touch a metal object with a
conductive surface that is connected to ground potential.
2. Wear a wrist strap.
3. When handling modules, only touch the edges or the module bracket, not the
3. When handling modules, only touch the edges or the module bracket, not the
components themselves.
Installing Additional Modules
Caution
To avoid a risk of electric shock, turn off power to the industrial
computer and disconnect the power supply before removing the rear
panel.
computer and disconnect the power supply before removing the rear
panel.
1. Switch off the Intelligence Panel and all units connected to the PC and disconnect the
PC from the power source.
2. Remove the screws from the rear panel and pick up the cover carefully.
4
Chapter