Emerson GXT 10KVA User Manual

The unit frame is bolted to the shipping pallet to ensure safety. Liebert recommends using a pallet 

jack to transport the unit to its operating location prior to unbolting the unit.

1. Once the Maintenance Bypass Cabinet is near the 

desired operating location, remove the cardboard 

cover.

2. Use a 1/2" (13mm) wrench to remove the eight 

mounting bolts (four per bracket) from the pallet 

brackets. Remove mounting brackets from the pallet 

and Maintenance Bypass Cabinet. Keep brackets and 

bolts for future transportation of the Maintenance 

Bypass Cabinet or for securing the cabinet to the 

floor.

3. Remove the metal ramp from the bottom of the pallet, 

rotating it 180°. Fit ramp onto opposite side of pallet (in slot) as shown below.

4. Using two people, slowly roll the Maintenance Bypass Cabinet down the ramp until the 

Maintenance Bypass Cabinet is on a level surface (see below, left).

5. Once the Maintenance Bypass Cabinet is in the desired location, adjust the leveling feet to secure 

its position (see below, right). 

This Maintenance Bypass Cabinet is heavy (see weight in Table 2). At least two people 

should assist to unload it from the pallet.