MGE UPS Systems Switched PDU User Manual

   

4. Advanced Operations 

The Show SNMP command displays all SNMP configuration information. 

• 

SNMP support status 

• 

SNMP community strings 

• 

Trap timer value 

• Trap 

destinations 

At the Switched PDU: prompt, type 

 and press 

. 

The following command displays the SNMP configuration information: 

Switched PDU: show snmp<Enter> 
   SNMP Configuration 
      SNMP:                              Enabled 
      SET Community String:              private 
      GET Community String:              public 
      TRAP Community String:             trap 
      Error Trap Repeat Time (seconds):  180 
      Trap Destination 1:                64.42.31.208 
      Trap Destination 2:                (undefined) 

The Switched PDU supports three types of SNMP traps.  Traps are enabled at the tower (T), infeed (I) or outlet 
(O) level. 

Status 

T, I, O 

Operational status change 

Change 

O 

Control status change 

Load 

I 

Input load out of limit 

All traps include the Location of the Switched PDU as defined with the Set Location command.  See Creating a 
location description on page 37  for more information. 

A Status trap is generated when an error condition occurs on a tower, infeed or outlet.  Status traps include the 
reported Status, the Location of the Switched PDU, and identifier and name of the affected tower, infeed or 
outlet. 

Any Trap Status generates a Status trap and triggers the trap timer.  A new trap is generated at the end of 
every timer period until the Status returns to a non-error status. 

Normal 

 

Tower is working correctly 

NoComm 

x 

Communication to the tower has been lost 

On 

 

Infeed is on 

OffError 

x 

Infeed should be on but no current is sensed at the infeed 

NoComm 

x 

Communication to the infeed has been lost 

301-0399-4 Rev A. - Page 49