MGE UPS Systems 3000 RT 3U XL User Manual
34007776EN/AB
- Page 10
2. Installation
2.4 Communication ports
Connection of RS232 or USB communication port (optional)
Installation of the communication cards (optional)
The RS232 and USB communication ports cannot operate simultaneously.
1 - Connect the RS232 (33) or USB (34)
communication cable to the serial or USB
port on the computer equipment.
communication cable to the serial or USB
port on the computer equipment.
2 - Connect the other end of the
communication cable (33) or (34) to the USB
(1) or RS232 (2) communication port on the
UPS.
communication cable (33) or (34) to the USB
(1) or RS232 (2) communication port on the
UPS.
The UPS can now communicate with MGE
UPS SYSTEMS power management
software.
UPS SYSTEMS power management
software.
Communication card slot
(restricted access)
It is not necessary to shutdown the UPS
before installing a communications card.
before installing a communications card.
1 - Remove the UPS cover (4) secured by
screws.
2 - Insert the communications card in the slot.
3 - Put the UPS cover back in place using the
screws.
screws.
2 - Insert the communications card in the slot.
3 - Put the UPS cover back in place using the
screws.
34
2
1
1
33
4