APC SMC10002U User Manual
9
Smart-UPS C 1000/1500/2000/3000 VA 120/230 Vac Rack-Mount 2U
System Faults
For more information on System Faults, contact customer support at the APC by Schneider
Electric Web site, www.apc.com/support.
Electric Web site, www.apc.com/support.
Feature Reference Guide
Normal Mode
Configuration Mode
The Configuration Mode provides additional options for the UPS. Press and hold the M
UTE
and
DISPLAY
buttons for 2 seconds until the system emits a short beep and the display will flash to
indicate the UPS has entered Configuration Mode.
When in Configuration Mode the DISPLAY button forwards the display through the available options
and the M
and the M
UTE
button toggles the configuration settings for that option.
Note: When system detects 15 seconds of no activity in Configuration Mode, or when you
press and hold the M
press and hold the M
UTE
and DISPLAY buttons for 2 seconds until the system emits a short
beep, the program automatically exits and returns to Normal mode.
120 Vac
230 Vac
P00 Output Overload
P01 Output Short Circuit
P02 Output Over Voltage
P04 Unit Over Temperature
P06 AVR Relay Fault
P13 Inverter Fault
Function
Button
Timing
(seconds)
UPS
State
Description
Power
Power On
0.2
Off
Press the
POWER
ON
/
OFF
button to turn on the UPS. The UPS
will operate on AC power.
If AC power is not available the UPS will operate on battery
If AC power is not available the UPS will operate on battery
power.
Power Off
2
On
Press the
POWER
ON
/
OFF
button to turn off the UPS.
Display
Status
Inquiry
Inquiry
0.2
On
Press to verify the status or condition of the UPS. The LCD
will illuminate for 60 seconds.
Mute
Enable/
Disable
Disable
2
On
Enable or disable the audible alarms. The Mute icon will
illuminate and the UPS will beep once.
Fault Reset
2
Fault
After a fault has been identified, press the
POWER
ON
/
OFF
button to remove the visual indication and return to standby
status.
su
07
52
a
su
07
5
2b