APC VS 100 User Manual
Magnum VS –48 Vdc User’s Manual
Page 31
PARAMETER NAME/
[MENU LOCATION]
DESCRIPTION SETTINGS
(Default
Settings in BOLD)
Battery Temperature
[STATUS/BATTERY/
PARAMETERS]
[STATUS/BATTERY/
PARAMETERS]
[
状态 / 电池 /参数]
Battery temperature measured by the
system controller at the optional battery
temperature sensor probe.
system controller at the optional battery
temperature sensor probe.
Battery Temperature
Status Only
Status Only
Date Setup
[SETUP/SYSTEM/TIME/DATE]
[SETUP/SYSTEM/TIME/DATE]
[
设置 / 系统 / 时/日]
System date stored in the controller.
Used as a date stamp in the event log.
Used as a date stamp in the event log.
Current DATE
Date Status
[STATUS/SYSTEM/Time/Date]
[STATUS/SYSTEM/Time/Date]
[
状态 / 系统 / 时/日]
Displays the current controller date.
Date Status Only
Equalize Automatically On/Off
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO]
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO]
[
设置 / 电池 /电压 /
均充 / 模式 / 自动]
Applies an overcharge to the battery to
equalize the specific gravity of a battery.
Auto equalization is initiated when the
controller determines that the batteries
have been discharged a set percentage
of their capacity or the batteries have
been on discharge for a set duration.
Use this screen to turn auto equalization
on.
equalize the specific gravity of a battery.
Auto equalization is initiated when the
controller determines that the batteries
have been discharged a set percentage
of their capacity or the batteries have
been on discharge for a set duration.
Use this screen to turn auto equalization
on.
ON, OFF
Equalize Automatically on AC
Fail
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO/AC
FAIL/ON/OFF]
Fail
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO/AC
FAIL/ON/OFF]
[
设置 / 电池 /电压 /
均充 / 模式 / 自动
/自动]
/自动]
Sets the time the ac input power has to
be off before equalization occurs.
be off before equalization occurs.
15 MINUTES – 360
MINUTES, 15 MINUTES
MINUTES, 15 MINUTES
Equalize Automatically on
Battery Discharge
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO/DISCHARGE]
Battery Discharge
[SETUP/BATTERY/
VOLTAGE/EQUALIZATION/
METHOD/AUTO/DISCHARGE]
[
设置 / 电池 /电压 /
均充 / 模式 / 自动 /
交流故障]
交流故障]
Sets the percent of battery discharge
before equalization occurs. Percent
Discharge = Discharged ampere-hours /
Battery Capacity ampere-hours
before equalization occurs. Percent
Discharge = Discharged ampere-hours /
Battery Capacity ampere-hours
5% - 50%, 30 %