Accton Technology 12i User Manual

Menu items are briefly described in the following table.

(Repeater Unit)

Hub ID

Hub identifier within the stack.  (Up to 6 hubs may be connected via the FlexBus
management channel.)

Name

Any user-defined name for the selected hub.

Status

The hub may be isolated from the backplane or attached to the backplane.

Segment

Attach the hub to a specified segment (1 ~ 3).  The segment indicator will light up to
show that it has been connected to the specified stack segment.

Power 1

Shows status of power module in Slot 1 as Operational, Not Present, or Failed.

Power 2

Shows status of power module in Slot 2 as Operational, Not Present, or Failed.

Position

The physical position in the stack.

Type

Indicates hub type as EH3512I-TX or EH3512M-TX.

H/W Ver

Indicates the current hardware version number of the repeater board.

F/W Ver

Indicates the current firmware version number of the repeater board.

Network

Status

Defines the status of the Network Management Module as Primary or Backup.

Management

Segment

The backplane segment the NMM is attached to.  Note that the management agent
does not have to be attached to the same segment as the repeater unit.

 Module (NMM)

Bootup Option

Specifies bootup method as -

NORMAL - Use on-board ROM code and default IP address.
TFTP DOWNLOAD - Get system code from TFTP server (and use default IP
address).
BOOTP GET IP - Get IP address from server (and use on-board ROM code).
BOOTP DOWNLOAD - Get IP address and system code from server.  Image is
stored in temporary memory.
NO BOOTP TFTP REQUEST - Do not issue BOOTP request.  Wait for download
via out-of-band.
BOOTP UPGRADE FIRMWARE - Get IP address and system code from server.
Image is stored in nonvolatile memory, and BOOTP option reset to NORMAL.  Note
that this is the only in-band option that places the image in nonvolatile memory.

H/W Ver

Indicates the current hardware version number for the managment board.

F/W Ver

Indicates the current firmware version number for the managment board.

Physical Address

MAC address of the management agent.