Accton Technology 12i User Manual
Fast EtherHub 3500 System User’s Guide
4-24
Configuring the System
Hub ID Configuration
To change the numeric hub identifier, select Hub ID
Configuration from the Hub Configuration: Hub Selection
Menu shown above. The following Hub ID Configuration
menu will appear. After changing a hub identifier, verify the
change with the “Enable Above Settings” command.
Configuration from the Hub Configuration: Hub Selection
Menu shown above. The following Hub ID Configuration
menu will appear. After changing a hub identifier, verify the
change with the “Enable Above Settings” command.
Hub ID Configuration
Return to Previous Panel
Position Hub ID
1.
1
2.
2
3.
3
4.
4
5.
5
6.
6
Enable Above Settings
Return to previous panel.
Use arrow keys to move. <Enter> to confirm.
<Ctrl+T> to return to Main Menu.
Use arrow keys to move. <Enter> to confirm.
<Ctrl+T> to return to Main Menu.
Figure 4-13 Hub ID Configuration Menu