Cabletron Systems HSIM-A6DP- User Manual

VPI (Modifiable)

This field is used to enter the Virtual Path Identifier of the PVC. The 
available range for this field is 0 or 1, with a default value of 0.

VCI (Modifiable)

This field is used to enter the Virtual Channel Identifier of the PVC. The 
available range for this field is 32 through 1020.

AAL Type  (Read-Only)

This field displays the ATM Adaptation Layer (AAL) being used by the 
PVC. The HSIM-A6DP uses AAL 5.

Encapsulation Type  (Toggle)

This field displays the type of data encapsulation that the HSIM-A6DP 
will use to perform LAN to ATM translation. This field toggles between 
the following options:

VC Based Multiplexing for Bridged 

Protocols as defined by the IETF RFC 1483.

Logical Link Control for Bridged Protocols as 

defined by the IETF RFC 1483.

BW (Mbps) (Modifiable)

This field is used to set the amount of bandwidth that will be assigned to 
this PVC.

Total Bandwidth On Interface (Read-Only)

This field displays the total amount of bandwidth that the port (APIM) 
provides.

Total Bandwidth Allocated (Read-Only)

This field displays the total amount of bandwidth that has already been 
allocated to existing PVCs. These PVCs may be viewed in the ATM 
Connection Setup screen. Refer to 

.

ADD/MODIFY (Command)

This command adds the PVC, or the modified PVC, to the HSIM-A6DP 
connection table.