Cabletron Systems HSIM-A6DP- User Manual
The Add/Delete Entry Screen
HSIM-A6DP User’s Guide
3-63
3.20.3
Modifying an Entry (PVC)
To modify an existing entry (PVC), perform the following steps:
1.
Use the arrow keys to highlight the IF field and enter the IF value that
you want to change.
you want to change.
2.
Use the arrow keys to highlight the VPI field and enter the VPI value
that you want to change.
that you want to change.
3.
Use the arrow keys to highlight the VCI field and enter the VCI value
that you want to change; acceptable values are 32 through 1020.
that you want to change; acceptable values are 32 through 1020.
4.
Use the arrow keys to highlight the Encapsulation Type field and
press the SPACE bar until the desired Encapsulation Type appears.
press the SPACE bar until the desired Encapsulation Type appears.
5.
Use the arrow keys to highlight the BW (Mbps) field. Enter the total
amount of available bandwidth that you wish to allocate to this PVC.
amount of available bandwidth that you wish to allocate to this PVC.
6.
Use the arrow keys to select the ADD/MODIFY command.
7.
Press ENTER. The “ENTRY DELETED” then “ENTRY ADDED”
messages appear at the top of the screen indicating that Local
Management has modified the PVC.
messages appear at the top of the screen indicating that Local
Management has modified the PVC.
NOTE
The HSIM-A6DP will not allow any PVCs to be created if the
desired bandwidth entered in the BW (Mbps) field exceeds the
available bandwidth of the APIM.
desired bandwidth entered in the BW (Mbps) field exceeds the
available bandwidth of the APIM.