Cisco Systems 3130 User Manual

Page of 1226
 
8-2
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 8      Configuring SDM Templates
Understanding the SDM Templates
The first eight rows in the tables (unicast MAC addresses through security ACEs) represent approximate 
hardware boundaries set when a template is selected. If a section of a hardware resource is full, all 
processing overflow is sent to the CPU, seriously impacting switch performance. The last row is a 
guideline used to calculate hardware resource consumption related to the number of Layer 2 VLANs on 
the switch. 
Dual IPv4 and IPv6 SDM Templates
You can select SDM templates to support IP Version 6 (IPv6). For more information about IPv6 and how 
to configure IPv6 unicast routing, see 
This software release does not support IPv6 multicast routing and QoS.
This software release does not support policy-based routing (PBR) when forwarding IPv6 traffic. The 
software supports IPv4 PBR only when the dual-ipv4-and-ipv6 routing template is configured.
The dual IPv4 and IPv6 templates allow the switch to be used in dual stack environments (supporting 
both IPv4 and IPv6). Using the dual stack templates results in less hardware capacity allowed for each 
resource. Do not use them if you plan to forward only IPv4 traffic. These SDM templates support IPv4 
and IPv6 environments:
Dual IPv4 and IPv6 default template—supports Layer 2, multicast, routing, QoS, and ACLs for 
IPv4; and Layer 2, routing, and ACLs for IPv6 on the switch.
Dual IPv4 and IPv6 routing template—supports Layer 2, multicast, routing (including policy-based 
routing), QoS, and ACLs for IPv4; and Layer 2, routing, and ACLs for IPv6 on the switch.
Dual IPv4 and IPv6 VLAN template—supports basic Layer 2, multicast, QoS, and ACLs for IPv4, 
and basic Layer 2 and ACLs for IPv6 on the switch. 
 defines the approximate feature resources allocated by each dual IPv4 and IPv6 template. 
Template estimations are based on a switch with 8 routed interfaces and 1024 VLANs. 
Table 8-1
Approximate Number of Feature Resources Allowed by Each Template
Resource
Access
Default Routing VLAN 
Unicast MAC addresses
4 K
6 K
3 K
12 K
IGMP groups and multicast routes
1 K
1 K
1 K
1 K
Unicast routes
6 K
8 K
11 K
0
Directly connected hosts
4 K
6 K
3 K
0
Indirect routes
2 K
2 K
8 K
0
Policy-based routing ACEs
0.5 K
0
0.5 K
0
QoS classification ACEs
0.5 K
0.5 K
0.5 K
0.5 K
Security  ACEs
2  K
1  K
1  K
1  K
VLANs
1 K
1 K
1 K
1 K