Raritan Computer DKSXII-V2.3.0-0D-E User Manual

 

Chapter 8: Device Management 

 

d.  Enter the Gateway IP Address.     

e.  Link-Local IP Address. This address is automatically assigned to 

the device. It is used for neighbor discovery or when no routers 
are present. Read-Only 

f. 

Zone ID. This identifies the device with which the address is 
associated. Read-Only 

g.  Select the IP Auto Configuration. The following options are 

available:   

  None - Use this option if you do not want an auto IP configuration 

and prefer to set the IP address yourself (static IP). This is the 
default and recommended option. 

If None is selected for the IP auto configuration, the following 
Network Basic Settings fields are enabled: Global/Unique IP 
Address, Prefix Length, and Gateway IP Address allowing you to 
manually set the IP configuration. 

  Router Discovery - Use this option to automatically assign IPv6 

addresses that have Global or Unique Local significance beyond 
that of the Link Local, which only applies to a directly connected 
subnet. 

5.  Select Obtain DNS Server Address Automatically if DHCP is 

selected and Obtain DNS Server Address is enabled. When Obtain 
DNS Server Address Automatically, the DNS information provided by 
the DHCP server will be used.     

6.  If Use the Following DNS Server Addresses is selected, regardless 

of whether DHCP is selected or not, the addresses entered in this 
section will be used to connect to the DNS server.   

Enter the following information if the Following DNS Server 
Addresses option is selected. These addresses are the primary and 
secondary DNS addresses that will be used if the primary DNS 
server connection is lost due to an outage. 

a.  Primary DNS Server IP Address   

b.  Secondary DNS Server IP Address   

7.  When finished, click OK. Your KSX II device is now network 

accessible.