Agilent Technologies 66309B User Manual

Page of 190
 
8 – Language Dictionary
124
 
STATus:QUEStionable:CONDition?
 
This query returns the value of the Questionable Condition register. That is a read-only register, which
holds the real-time (unlatched) questionable status of the dc source.
   
 
Query Syntax
 
STATus:QUEStionable:CONDition?
 
Parameters
 
None
 
Examples
 
STAT:QUES:COND?
 
Returned Parameters
 
<NR1> (register value)
 
STATus:QUEStionable:ENABle
 
This command and its query set and read the value of the Questionable Enable register. This register is a
mask for enabling specific bits from the Questionable Event register to set the questionable summary bit
(QUES) of the Status Byte register.  This bit (bit 3) is the logical OR of all the Questionable Event
register bits that are enabled by the Questionable Status Enable register..
   
 
Command Syntax
 
STATus:QUEStionable:ENABle<NRf>
 
Parameters
 
0 to 32767
 
Preset  Value
 
0
 
Examples
 
STAT:QUES:ENAB 4098   !enables OC2 and OCP
 
Query Syntax
 
STATus:QUEStionable:ENABle?
 
Returned Parameters
 
<NR1> (register value)
 
Related Commands
 
STAT:QUES?
 
STATus:QUEStionable:NTR
STATus:QUEStionable:PTR
 
These commands allow you to set or read the value of the Questionable NTR  (Negative-Transition) and
PTR (Positive-Transition) registers. These registers serve as polarity filters between the Questionable
Enable and Questionable Event registers to cause the following actions:
u When a bit of the Questionable NTR register is set to 1, then a 1-to-0 transition of the corresponding
bit of the Questionable Condition register causes that bit in the Questionable Event register to be set.
u When a bit of the Questionable PTR register is set to 1, then a 0-to-1 transition of the corresponding
bit in the Questionable Condition register causes that bit in the Questionable Event register to be set.
u If the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the
Questionable Condition register sets the corresponding bit in the Questionable Event register.
u If the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the
Questionable Condition register can set the corresponding bit in the Questionable Event register.
 
 
 
Command Syntax
 
STATus:QUEStionable:NTRansition<NRf>
 
STATus:QUEStionable:PTRansition<NRf>
 
Parameters
 
0 to 32767
 
Preset Value
 
NTR register = 0; PTR register = 32767
 
Examples
 
STAT:QUES:NTR 16
STATUS:QUESTIONABLE:PTR 512
 
Query Syntax
 
STAT:QUES:NTR?STAT:QUES:PTR?
 
Returned Parameters
 
<NR1>(Register value)
 
Related Commands
 
STAT:QUES:ENAB