Enterasys Networks 2200 User Manual

Proceed as follows to install the 2H258-17R into a 19-inch rack:

1. There are several mounting holes in the rackmount brackets and the bottom of the chassis so that 

each mounting bracket may be adjusted forward or backward to mount the device further into, 
or out of the rack, depending on the installation requirements. Position the rackmount brackets 
over the appropriate holes.

2. Locate the four 6-32 x 1/4-inch flathead screws in the rackmount kit. Use these screws to attach 

the rackmount brackets to the bottom of the 2H258-17R as shown in 

.

3. With the mounting brackets attached, position the 2H258-17R between the vertical frame 

members of the 19-inch rack and fasten it securely with mounting screws as shown in 

.

Rackmount Bracket

Rackmount Bracket Screws

3068-04