Enterasys Networks 6H3xx User Guide
Static VLAN Configuration Screen
802.1Q VLAN Configuration Menu Screens
8-7
Field Descriptions
for a functional description of each screen field. Refer to
through
for the application of these fields.
Table 8-2
Static VLAN Configuration Screen Field Descriptions
Use this field…
To…
VLAN ID
– top of screen
(Read-Only)
– top of screen
(Read-Only)
See the assigned VLAN IDs that are configured in the switch module.
Initially, only the Default VLAN (VLAN ID: 1) is listed. Up to ten
VLANs can be displayed in the screen.
Initially, only the Default VLAN (VLAN ID: 1) is listed. Up to ten
VLANs can be displayed in the screen.
If there are more than ten VLANs, the NEXT command appears at the
bottom of the screen to allow stepping to the next screen.
bottom of the screen to allow stepping to the next screen.
FDB ID
(Read-Only)
(Read-Only)
See the Filter Database ID (FDB ID) numbers of the associated
VLAN IDs. This value is allocated automatically by the device when
the VLAN is created: either dynamically by GVRP, or when a Static
VLAN is created using this screen.
VLAN IDs. This value is allocated automatically by the device when
the VLAN is created: either dynamically by GVRP, or when a Static
VLAN is created using this screen.
VLAN Name
– top of screen
(Read-Only)
– top of screen
(Read-Only)
See the VLAN Name of the associated VLAN ID. If a name has not
been assigned to a VLAN, no name is displayed in the VLAN Name
field.
been assigned to a VLAN, no name is displayed in the VLAN Name
field.
VLAN ID
– bottom of screen
(Modifiable)
– bottom of screen
(Modifiable)
Enter a VLAN ID (VID) number (2 to 4094) for the new VLAN. Up to
1024 VLANs are supported by the switch module.
1024 VLANs are supported by the switch module.
VLAN Name
– bottom of screen
(Modifiable)
– bottom of screen
(Modifiable)
Assign or change names of VLANs. The VLAN Name (with up to 32
characters) is an optional attribute of a VLAN, and is not required for
VLAN operation.
characters) is an optional attribute of a VLAN, and is not required for
VLAN operation.
ADD
(Command)
(Command)
Add the new VLAN to the switch module. If this is successful, the
screen refreshes and the new VLAN is added to the list in the screen.
screen refreshes and the new VLAN is added to the list in the screen.
DEL MARKED
(Command)
(Command)
Delete the VLANs shown in the screen marked with an asterisk to the
left of the VLAN ID number. The Default VLAN cannot be marked
and deleted.
left of the VLAN ID number. The Default VLAN cannot be marked
and deleted.