Enterasys Networks 6E2xx User Guide

All, or one or more, line items containing the configured port and its priority, maximum rate, and 
associated dropped frames can be changed/replaced or deleted as follows:

To change the configuration values in a line item, that line item must be deleted and replaced with 
a new entry with the correct configuration values. The new settings can then be configured and 
added. 

To delete all configured line items, use the arrow keys to highlight the DEL ALL command field 
and press ENTER.

To delete one or more line items, mark each entry and then delete them, as follows:

1. Use the arrow keys to highlight a line to be deleted.

2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL 

command is changed to DEL MARKED.

3. If more than one line item is to be deleted, repeat 

 to mark each line. 

4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field. 

5. Press ENTER. The marked line items are deleted and the DEL MARKED command is changed 

back to DEL ALL.

NOTE: To remove a mark, perform 

 and 

. When a marked line is highlighted, 

pressing M will remove the mark. If all marks are removed, the DEL MARKED command 
is changed back to DEL ALL

.