Siemens 6ED1050-1AA00-0BE8 User Manual

LOGO! functions

4.3 Special Functions

LOGO!
Manual, 04/2011, A5E03556174-01

151

Connector X at SF inputs

SF inputs connected to connector x are set low. That is, the inputs carry a 'lo' signal.

Parameter inputs

At some of the inputs you do not apply any signals. You configure the relevant block values

instead. Examples:
● Par (Parameter):

This input will not be connected. Here, you set the relevant block parameters (times,

on/off thresholds etc.).

● No (Cam):

This input will not be connected. Here, you configure the time patterns.

● P (Priority):

This is an open input. Here, you define priorities and specify whether a message is to be

acknowledged in RUN.

4.3.2

Time response

Parameter T

At some of the SFs it is possible to configure a time value T. When you preset this time, note

that your input values are based on the timebase set:

Timebase

_ _ : _ _

s (seconds)

seconds :

100

seconds

m (minutes)

minutes : seconds

h (hours)

hours : minutes

7 K

6HWWLQJDWLPH7RIPLQXWHV
8QLWLQKRXUVK
KRXUV

PLQXWHV

KRXUV

PLQXWHV

Exception:
The LOGO! 0BA7-specific stopwatch function provides an additional timebase - 10 ms. For a

detailed description, see the topic Stopwatch (0BA7 only) (Page 198).