Generac HTSN400K3 Leaflet

•  Single coil design, electrically operated and

mechanically held

•  Programmable exercise time
•  SPDT aux contacts
•  Main contacts are silver alloy
•  Conformal coating protects the printed circuit board
•  UL1008 Listed
•  Indicating LED’s for switch position, standby

operating, utility available

•  3 position test switch: Fast Test, Auto, Normal Test
•  Arc shutes on main contacts
•  Signal before transfer contacts
•  Rated to all classes of loads
•  Remote start, stop and transfer through GenLink

®

Communications Software

•  Up to four transfer switches per generator
•  50/60 hertz operation

200 Amp HTS NEMA 1

•  The Generac HTS Transfer Switch is a “State

of the Art” Smart Switch designed to operate
in conjunction with the Generac H100 Series
generator controller.

•  The HTS Transfer Switch has a 2 wire RS485

communication link to the generator controller.

•  The utility voltage is monitored by the HTS

along with signal before transfer timing, time
delay neutral and inphase transfer.

•  Switch operation is instigated by the generator

controller.

•  All timers and voltage setpoints are

programmable through GenLink

®

Communications Software.

•  Time delay neutral and inphase monitor are

included.

•  NEMA 12 enclosure (100-400 Amps)
•  NEMA 3R enclosure (All)

•  NEMA 4 and 4x enclosure
•  4 pole for separately derived systems