McDATA 3232 User Manual
A
A-24
Messages
Description
A file was not selected in the Firmware Library dialog box before an
action, such as modify or send was performed.
action, such as modify or send was performed.
Action
Click a firmware version in the dialog box to select it, then perform
the action again.
the action again.
Message
No firmware versions to delete.
Description
There are no firmware versions in the firmware library to delete.
Action
N/A. An informational message.
Message
Non-redundant switch must be offline to install firmware.
Description
Since the switch has only a single CTP card, it must be offline to
initiate a firmware installation.
initiate a firmware installation.
Action
Take switch offline and try again.
Message
Not all of the optical transceivers are installed for this range of
ports.
ports.
Description
Some ports in the specified range do not have optical transceivers
installed.
installed.
Action
Use a port range that is valid for the ports installed.
O
Message
Open Trunking is not installed for this product. Please contact your
sales representative.
sales representative.
Description
The Open Trunking feature key has not been enabled. This message
only displays if the optional Open Trunking feature is installed.
only displays if the optional Open Trunking feature is installed.
Action
Enter the feature key into the Configure Feature Key dialog box and
enable the key. If you require a feature key, see your account
representative.
enable the key. If you require a feature key, see your account
representative.