McDATA 3232 User Manual
A
A-26
Messages
Action
Review the Switch Binding Membership List to determine if the
devices should be members.
devices should be members.
Message
Port cannot swap to itself.
Description
Port addresses entered in the Swap Ports dialog box are the same.
Action
Make sure that address in the first and second port address fields are
different.
different.
Message
Port diagnostics cannot be performed on an inactive port.
Description
This displays when port diagnostics is run on a port in an inactive
state.
state.
Action
Run the diagnostics on an active port.
Message
Port speeds cannot be configured at a higher rate than the
director/switch speed.
director/switch speed.
Description
This displays when you configure a port to 2 GB/sec and the switch
speed is set to 1 Gb/sec.
speed is set to 1 Gb/sec.
Action
Set the port speed to 1 Gb/sec in the Configure Ports dialog box.
Message
Element Manager error <number>.
Description
The switch Element Manager encountered an internal error and
cannot continue.
cannot continue.
Action
Report the problem to support personnel.
Message
Element Manager instance is currently open.
Description
A Element Manager window is currently open.
Action
Informational message only.