Moxa Technologies EDS-405A User Manual
EDS-408A/405A Series User’s Manual
Featured Functions
3-43
Using Rate Limiting
A single device should not be allowed to occupy unlimited bandwidth, especially when the device
malfunctions. For example, broadcast storms could be caused by an incorrect topology or
malfunctioning device. The EDS-408A/405A series not only prevents broadcast storms, but can
also configure the ingress rate of unicast/multicast/broadcast packets, giving administrators full
control of the limited bandwidth, and preventing unpredictable faults before they occur.
malfunctions. For example, broadcast storms could be caused by an incorrect topology or
malfunctioning device. The EDS-408A/405A series not only prevents broadcast storms, but can
also configure the ingress rate of unicast/multicast/broadcast packets, giving administrators full
control of the limited bandwidth, and preventing unpredictable faults before they occur.
Configuring Rate Limiting
NOTE: The user interface for the EDS-408A shows 8 ports.
Policy
Setting
Description
Factory Default
Limit All
Selecting this option prohibits all traffic of
broadcast, multicast, and unicast packets that
exceed the rate set in the following “Rate” field.
broadcast, multicast, and unicast packets that
exceed the rate set in the following “Rate” field.
Limit Broadcast
Selecting this option prohibits all traffic of
broadcast packets that exceed the rate set in the
following “Rate” field.
broadcast packets that exceed the rate set in the
following “Rate” field.
Limit Broadcast
and Multicast
and Multicast
Selecting this option prohibits all traffic of
broadcast and multicast packets that exceed the rate
set in the following “Rate” field.
broadcast and multicast packets that exceed the rate
set in the following “Rate” field.
Limit Broadcast,
Multicast, and
flooded unicast
Multicast, and
flooded unicast
Selecting this option prohibits all traffic of
broadcast, multicast, and flooded unicast (new
unicast addresses not learned by the EDS) packets
that exceed the rate set in the following “Rate”
field.
broadcast, multicast, and flooded unicast (new
unicast addresses not learned by the EDS) packets
that exceed the rate set in the following “Rate”
field.
Limit Broadcast