Moxa Technologies EDS-405A User Manual

 

2. 

Configuring Email Settings 

To configure the EDS’s email setup from the Console interface or browser interface, enter 
your Mail Server IP/Name (IP address or name), Account Name, Account Password, Retype 
New Password, and the email address(es) to which warning messages will be sent. 

3. 

After configuring and activating your EDS’s Event Types and Email Setup, you can use the 
Test Email function to see if your e-mail addresses and mail server address have been 
properly configured. 

Email Warning Events Settings 

 

NOTE: The user interface for the EDS-408A shows 8 ports. 

Event Types can be divided into two basic groups: System Events and Port Events. System 
Events are related to the overall function of the switch, whereas Port Events are related to the 
activity of a specific port. 

Switch Cold Start 

Power is cut off and then reconnected. 

Switch Warm Start 

The EDS is rebooted, such as when network 
parameters are changed (IP address, netmask, etc.). 

Power Transition (OnÆOff) 

The EDS is powered down. 

Power Transition (OffÆOn) 

The EDS is powered up. 

Configuration Change Activated

Any configuration item is changed. 

Comm. Redundancy Topology 
Changed 

If any Spanning Tree Protocol switches have 
changed their position (applies only to the root of the 
tree). 
If the Master of Turbo Ring has changed or backup 
path is activated. 

Authentication Failure 

An incorrect password is entered.