Fujitsu RX900 S1 User Manual

RX900 S1

Maintenance Manual

105

I

The number and location of available PCIe slots depends on the 
CPUMEMR configuration. Make sure that the planned CPUMEMR 
configuration enables you to use the PCIe slots needed for the individual 
use case of the server.

For detailed information on configuration rules and supported expansion 
card types see "Baseboard D3081, CPUMEMR D3131, PCIR D3082 for 
PRIMERGY RX900 S1 Technical Manual" or in the configurator using the 
following link:

(for the EMEA market).

 shows the PCIe slot configuration. Expansion cards can be installed 

in the PCIe slots on the PCI Riser (A) and on the baseboard (D). The PCI Riser 
is connected to the baseboard via the connectors C and E.

The PCIe slots are assigned as follows:

●

B: non-hot plug PCIe slots on the PCI Riser

●

F: non-hot plug PCIe slot for the Modular Raid controller only

●

G: hot-plug PCIe slots

●

H: non-hot plug PCIe slots on the baseboard

Authorized specialist personnel can carry out replacement tasks for 
integral server components. Ask you local Fujitsu service center for 
more detailed information.

V

Procedures indicated as "Authorized personnel only“ must be 
done by Fujitsu service personnel or technicians trained by 
Fujitsu for doing these tasks. Please note that unauthorized 
interference with the system will void the warranty and exempt the 
manufacturer from all liability.