Fujitsu RX900 S1 User Manual
60
Maintenance Manual
RX900
S1
Power supply
5.3.3
Removing the power supply unit
Figure 16: Unlocking and removing the power supply unit
Ê
Remove the power cord from the cable strap. You can loosen the cable strap
by opening the small locking lever.
by opening the small locking lever.
Ê
Remove the power cord from the installed power supply unit.
Ê
Press the green release lever (1) and pull out the power supply unit in the
direction of the arrow (2). Grip the handle while pulling the power supply.
direction of the arrow (2). Grip the handle while pulling the power supply.
Ê
Completely remove the defective power supply unit from the bay.
V
CAUTION!
Never leave the bay for the power supply unit empty for more than two
minutes during operation. Otherwise, excessive temperatures could
damage system components.
minutes during operation. Otherwise, excessive temperatures could
damage system components.
/
0