Fujitsu RX900 S1 User Manual
62
Maintenance Manual
RX900
S1
Power supply
5.4
Replacing the power distribution board
5.4.1
Required tools
●
Starting and completing the task:
–
key for the rack doors (if applicable)
–
Phillips Ph2 screw driver
●
Replacing the power distribution board:
–
Phillips Ph2 screw driver
5.4.2
Starting the task
Ê
Perform the following procedures:
1.
2.
3.
4.
5.
6. Remove all PSUs, see
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.