Fujitsu RX900 S1 User Manual

RX900 S1

Maintenance Manual

87

Figure 38: Unlocking the 2.5-inch HDD/SSD module

Ê

Release the locking mechanism as follows:

1. Press the two green tabs of the locking lever together (1). 

2. Push the handle of the HDD/SSD module fully in the direction of the 

arrow (2). The HDD/SSD module is now unlocked.

Ê

Pull the HDD/SSD module out a few centimeters.

Ê

Wait for at least 60 seconds. 

I

This period is necessary for the RAID controller to recognize that an 
HDD/SSD module has been removed and for the hard disk drive to 
come to a stop.

Ê

Pull the HDD/SSD module out completely.

2

1